Call to discuss your project today +44 (0)1472 240 340

Systems · ErreLAB · Acrylic paste

ErreLAB ErreFast

A ready-to-use acrylic paste for cement and stone effects on floors and walls. Add pigment, mix and apply, for a decorative finish in 2 to 3 days.

FloorsWallsWorktopsIndoor
Request a sampleGet a priceor call 01472 240 340
ErreLAB ErreFAST Fine resin in warm ochre tone

What it is

ErreFast is a single-component acrylic paste. There’s nothing to measure: add your chosen pigment, mix and it’s ready. It goes on faster than mineral microcement or epoxy systems, so a project can be finished in 2 to 3 days.

It can go straight onto plaster, concrete, plasterboard, MDF and even existing tiles, without complex preparation, and is protected with a transparent sealer for durability and washability. ErreLAB recommends a matt finish.

Easy to work with, it suits applicators new to decorative resins as well as experienced specialists. ErreFast is for indoor use.

At a glance

Type
Single-component acrylic paste
Use
Indoor floors, walls and worktops
Substrates
Plaster, concrete, plasterboard, MDF, existing tiles
Time
2 to 3 days
Sealer
Transparent sealer, matt recommended
Colour
ErreLAB colour range

Two pastes

Use them on their own or together, for an even wider choice of finishes.

ErreFast XL (R312)

ErreFast XL (R312)

A coarse paste for bold, textured, hand-crafted effects. Use it on its own or as the base layer.

ErreFast Fine (R313)

ErreFast Fine (R313)

A smooth, fine-grain paste for soft, velvety finishes, usually applied over XL.

Key features

FastFinished in 2 to 3 days.
Single componentAdd pigment, mix and apply.
Goes over most surfacesPlaster, concrete, plasterboard, MDF and existing tiles.
Smooth or texturedXL and Fine on their own or combined.
Hard wearingFor floors, walls and worktops in homes and commercial spaces.
Stain resistantSealed for durability and easy cleaning.

See the finish

3 photos

When to choose ErreFast

The middle path between traditional mineral microcement and high-performance resin.

When speed mattersFewer layers and less waiting between coats than resin, so rooms are back in use sooner.
A short learning curveOne component, ready from the bucket, with consistent results.
Dry, indoor areasNot for showers, wet rooms or anywhere with regular water. Choose ErreLAB resin there.

Colours

ErreFast comes in 202 colours across three charts: WeAreColor (101), Colours Selection (40) and Standard (61). A few colours aren’t available in ErreFast, and they’re marked on the charts.

WeAreColorColours SelectionStandard coloursRequest a sample

Installation

ErreFast is the easiest ErreLAB system to apply. The data sheets cover each paste step by step.

Want to apply it yourself? See our training courses, or call us to talk through your project.

Videos

ErreLAB’s own videos are in Italian, but the technique speaks for itself.

Downloads

ErreFast brochure and colour chartPDF ↓ErreFast XL data sheetPDF ↓ErreFast Fine data sheetPDF ↓

Galleries

ErreLAB ErreFastFast acrylic system for floors and walls

Guides

Compare the systems

Compare the systems

Politura, ErreFast and ErreLAB side by side: water resistance, speed and where each can go.

Compare them Applying microcement

Applying microcement

Who it suits, which system is easiest to learn, and how to get good at it.

Read the guide Microcement vs micro concrete

Microcement vs micro concrete

They sound alike but aren’t the same. The difference is thickness.

Read the guide

Planning an ErreFast project?

We’ll help you choose a paste and colour, send samples and talk you through preparing your surface.

Request a sampleGet a price