Call to discuss your project today +44 (0)1472 240 340

Systems · ErreLAB · Range

ErreLAB decorative resins

Decorative resin systems from Italy that recreate microcement, natural stone and metal, with the hardness and stain resistance of resin.

FloorsWallsWorktopsWet areasIndoorOutdoor
Grey ErreLAB Spatolato wall with wooden bar stool and white sculptural figure

What it is

ErreLAB is an Italian brand from the Covema group, which has more than 50 years’ experience in decorative coatings. We are ErreLAB’s UK distributor, with stock, samples and technical support from Grimsby.

ErreLAB systems are resin-based rather than cement-based. That makes them non-porous and harder wearing than a mineral microcement: most spills sit on the surface until you wipe them up, even where the sealer has been damaged.

Indoors, ErreLAB uses epoxy resins (Spatolato, Velato and Pietra Continua, plus Metallo Continuo, which adds a metallic gel over a Spatolato base) and a fast acrylic paste (ErreFast). Outdoors, it uses polyurethane versions made to stand up to UV and weather. There are build-ups for screeds, tiles, damp substrates and gypsum plasters, so call our technical team and we’ll help you choose the right one.

Comparing ErreLAB with Politura? Our microcement guide explains the differences and how to choose.

At a glance

Made in
Italy, by the Covema group
Indoor
Epoxy resins and an acrylic paste
Outdoor
Polyurethane resins
Use
Floors, walls and worktops
Colour
ErreLAB colour range, plus most RAL and NCS colours
Installation
Professional installation recommended

Key features

Floors, walls and worktopsOne continuous finish, with no grout joints.
Non-porousStain resistant, even if the sealer is damaged.
Hard wearingHarder wearing than mineral microcement.
Smooth or texturedFrom minimal Spatolato to textured stone and metal.
Colour matchingMost RAL and NCS colours can be matched.
Indoor and outdoorDedicated polyurethane versions for outside.

Colours

Six colour charts, each designed for particular finishes.

Tested performance

Independently tested, so you can specify it with confidence.

R10–R12Slip resistanceSpatolato with Top Clear, up to R12 with anti-slip Top Clear SOL (DIN 51130).
Bfl-s1FireSpatolato floor system over concrete or screed (EN 13501-1).
A+Indoor air qualityTop Clear sealers, the best class under French VOC rules (Eurofins, 2019).

Each system page lists its own results. Full certificates are on ErreLAB’s certification page, or call 01472 240 340 and we’ll send them over.

Videos

ErreLAB’s own videos are in Italian, but the technique speaks for itself.

Not sure which ErreLAB system?

Tell us about your project and we’ll recommend a system, send samples and talk you through the build-up for your substrate.